Rates for Level I and II Classes
include General, Specific and Practical Tests for Level I and II
SNT-TC-1A classes
Fees for training as per SNT-TC-1A
| MT I and II | 24 hrs | $695 |
| PT I and II | 16 hrs | $595 |
| UT II Ltd Thickness | 24 hrs | $695 |
| VT I and II | 24 hrs | $695 |
| UT Level I | 40 hrs | $1095 |
| UT Level II | 40 hrs | $1095 |
| RT II Ltd. Interpretation | 40 hrs | $ 1095 |
| ET Level I | 40 hrs | $1195 |
| ET Level II | 40 hrs | $1195 |
| Phased Array UT (one week) | 40 hrs | $ 1450 |
| Phased Array UT II | 80 hrs | $ 2450 |
| TOFD | 40 hrs | $ 1450 |
| Intro to NDT | 40 hrs | $1650 |
DISCOUNTED COURSE PACKAGES SNT-TC-1A (Must be completed in 4 months).
| Package | Description | Weeks | Price | Savings |
| A | MT, PT, UT, VT (I and II) | 3-1/2 | $ 3875 | $300 |
| B | MT, PT, UT (I and II) | 3 | $ 3230 | $250 |
| C | MT, PT, UT, ET (I and II) | 5 | $ 5370 | $500 |
| D | MT, PT, UT (I and II), PAUT II | 5 | $ 5530 | $400 |
| E | MT, PT, VT (I and II), RT-FI (40 hr) | 2 | $ 2830 | $250 |
| F | MT, PT, VT, UT, ET (I and II) | 5-1/2 | $ 5995 | $570 |
Fees for training as per NAS410
| MT I and II | 32 hrs | $1095 |
| PT I and II | 32 hrs | $1095 |
| UT or ET Level I | 40 hrs | $1195 |
| UT or ET Level II | 40 hrs | $1195 |
FEE PAYMENT REQUIREMENTS
1. All Fees must be paid before the start of the class. POs
are acceptable from Business accounts.
2. Students will not be allowed to take the class if either the fee is not
paid in full or the PO is not received.
3. Certificates will be issued only after receipt of full payment.
4. A $200 deposit is required to book your place in the class. POs are
acceptable from Business accounts.
5. DO NOT Send credit card numbers via email
Rates apply for
scheduled training in our Houston office.
NAS 410 classes are not
regularly scheduled and must be made on an "as needed" basis.
Rates subject to change. Course Fee shall be paid in advance.
IN-PLANT TRAINING (Client
Location)
Training is also available at the client's location.
In-plant training can be scheduled as required. Please call (281)
488-8944 for In-Plant training rates.
Training can also be scheduled on an "as needed basis."
Fundamentals of NDT Class held for OMV Petron, Bucharest, Romania, Dec 2012. Instructor: Anmol Birring
Introduction to NDT Class in Istanbul, Turkey for South Oil Company, Iraq, Jan 2013. Instructor: Anmol Birring
Equipment used for UT Training (L to R): Epoch 4, USN 60, USN Go, USN 58, Epoch 600 and welded test plates with embedded flaws
Ultrasonic Shear Wave Training on Weld Test Samples
Liquid Penetrant Training for Royal Caribbean Cruise Lines
Birring NDE Center
515 Tristar Drive
Webster, TX 77598
Phone: (832) 533-8366
Fax: (281) 488-8485
